SHS-700 Hydraulic Spreader
A Compact, Multi-Function Tool for Fast Rescue Work
In a rescue, time matters more than anything else. A door crushed in a road accident, a gap that is too narrow for a person's hands, a heavy piece of debris pinning someone down: these are situations where teams need a tool they can trust and use quickly. The SHS-700 Hydraulic Spreader is made for that kind of work. It can spread, tear, clamp and pull with a single working head, so the crew does not need to stop and change attachments.
It is light enough to carry to the scene and strong enough to open up damaged metal and structures. Here is what it offers and where it fits.
What Is the SHS-700, Really?
Think of a strong hydraulic jaw that pushes things apart when pressure is applied. The SHS-700 Rescue Spreader has a lightweight body made from high-strength aluminium alloy with a ceramic coating on the surface. Its spreader head sits inside the arm in a flat design, so it can slip into a narrow gap and start opening it from there. That makes it useful when the first few millimetres are the hardest part of the job.
Key Specifications
| Spreading force | 5.2 tons |
|---|---|
| Maximum spreading distance | 740 mm |
| Maximum pulling force | 7.4 tons |
| Weight | 17 kg |
| Body material | aluminium alloy with ceramic coating |
| Functions | spreading, tearing, clamping and pulling |
How the Spreader Works
When hydraulic pressure is applied, the two arms move apart and push against whatever is in between, whether it is a car door, a panel or a piece of debris. Reverse the pressure and the arms close, which lets you clamp or pull. A manual reversing valve with automatic neutral reset returns to the centre when you let go, so the movement stops exactly where you want it. In simple terms, the SHS-700 Hydraulic Rescue Spreader turns hydraulic pressure into controlled force at the tips of its arms.
A typical use looks like this:
- Position the tool and slip the flat spreader head into the gap.
- Connect the hydraulic supply and check the couplings.
- Operate the valve to open the gap gradually.
- Release the valve, and the built-in lock holds the position.
One tip: open the gap in small steps and check the position after each one. It gives the crew time to react and keeps the work under control.
Where You Can Use It
The SHS-700 is a general-purpose tool for emergency work. As an SHS-700 Rescue Tool, it is used for vehicle extrication after road accidents, where doors, roofs and panels need to be opened quickly and safely. It also helps in collapsed structures, industrial accidents and any situation where a narrow gap needs to be widened to reach someone.
Why a Multi-Function Tool Makes Sense
In a real rescue, there is rarely time to fetch and fit different attachments. A single head that can spread, tear, clamp and pull lets the crew adapt to the situation without stopping. It also means fewer parts to carry and fewer things to check.
That is helpful on the road, in a collapsed building or in a factory, where the situation can change from one minute to the next.
Prepare Before You Begin
A little preparation saves time when the call comes:
Safety and Maintenance
Regular care keeps the tool ready for the day it is needed.
Light Enough to Carry to the Scene
At 17 kg, the SHS-700 is easy for a rescuer to carry into a tight or awkward spot. The aluminium alloy body keeps the weight down without losing strength, and the ceramic coating helps it stand up to rough use and wet conditions.
Who Uses the SHS-700?
Buying a Rescue Spreader: What to Check
If you are looking for an SHS-700 Spreader Supplier, ask for the spreading force, the maximum spreading distance and the working pressure of the tool. It also helps to confirm which hydraulic power source and hoses it needs, and whether spare parts, training and service support are available. A good match between the spreader and its power source keeps the whole rescue kit dependable.
